PDA

View Full Version : antenna delete


Mach351
12-10-2006, 10:06 PM
So I asked Santa for an iPod nano for christmas. I also got a satellite radio/MP3 receiver for my car back on father's day. Couple that with my general distaste for local radio:puke: and that **** antenna had to GO.

step1. This is what the base of the antenna looks like after it's unscrewed from the fender:
http://bsoles.com/antenna_delete/01.jpg


http://bsoles.com/antenna_delete/02.jpg

step2. I stripped off the paint around the holes for welding.
http://bsoles.com/antenna_delete/03.jpg

Mach351
12-10-2006, 10:06 PM
This is what it looked like after stripping:
http://bsoles.com/antenna_delete/04.jpg

I removed the inner fender, this is the crud I found:
http://bsoles.com/antenna_delete/06.jpg

The orange wire is the antenna lead, I wrapped that up in electrical tape and bound it with the other wires. I then cleaned up all that pine straw!
http://bsoles.com/antenna_delete/07.jpg

Here I welded up the holes where the screws were
http://bsoles.com/antenna_delete/08.jpg

Mach351
12-10-2006, 10:08 PM
Next, I use paper from underneath to make a template
http://bsoles.com/antenna_delete/09.jpg
Here is my template, with the 21 gauge sheetmetal I'll transfer it too.
http://bsoles.com/antenna_delete/10.jpg

The sheetmetal is cutout and is a pretty tight fit.
http://bsoles.com/antenna_delete/11.jpg
This is after I've welded the patch in, and ground down all the welds
http://bsoles.com/antenna_delete/12.jpg

Mach351
12-10-2006, 10:10 PM
Here's the primer:
http://bsoles.com/antenna_delete/13.jpg

Finally, the base and clearcoat. Commercial free radio is now mandatory. My wife and family don't understand why I did it. "How are you going to listen to the radio?" and "how are you going to sell it without an antenna?" I laff, cuz I'm never selling my stang.
http://bsoles.com/antenna_delete/14.jpg

761.2MPH
12-10-2006, 10:35 PM
Dang Brian, you were busy today! All the work looks great.

chromebullitts
12-11-2006, 01:15 AM
Brian that really looks good. I look forward to seeing it in person. Nice job.

caspian65
12-11-2006, 08:48 AM
Impressive!

LoudEnuf
12-11-2006, 09:52 AM
Very Impressive!!! Cant even tell one was ever there!! Nice job

mustang1369
12-11-2006, 10:16 AM
You are a braver man than I.... GREAT JOB!

zincsnake
12-11-2006, 06:23 PM
Man good job!!! Wish I had those skills.