Airbag sensor

[1993LX]

Question here guys. The airbag sensor light on my Stang started to come on. And I mean not on and stay on, but it would blink 3 - 4 times then pause, then blink 3 - 4 times.. and so on and on and on. I took it to my mechanic to plug into the computer to see if that would say why the senor light is coming on. But unfortunately it didn't bring anything up. So does anyone have any insight on this.

[08SGT1234]

Graham,

Try searching on this website: http://www.mustanggt.org/

[chrismullins99]

The flashing is telling you a code. Try to pay attention to what the pattern is and that will tell you the code. I know a guy that has all the codes, I could probably get it looked up for you. Or give the Ford Dealership a call and they can tell you what the code means.

[1993LX]

It is blinking 3 times.

[chrismullins99]

It is blinking 3 times.

I emailed the guy, hopefully he will send me a list of all the codes.

[jnatale3]

There should be 4 sensors behind the a/c heater panel that run from the frame of your car. They determine the force of an impact to deploy the airbags. From what I have seen in my career, that sounds like a code #34 which is "Low resistance in driver air bag circuit". I think it is a blue colored fuse that has to be replaced. It means that the circuit is weakening and might not deploy the airbag in a collision. Getting it "officially" tested is the best bet so you have that added restraint if needed.
-Joe

[MustangGT423]

I emailed the guy, hopefully he will send me a list of all the codes.

Need your help too My airbag light is flashing in a code too Let me know if you could help......:wink:

[MustangGT423]

I was searching threw the web and I found this on the codes. see if it'll help you or any ya'll who need it...:Word:

http://www.veryuseful.com/mustang/tech/airBag/airBag90-91.html

[jnatale3]

Is it doing what the other posted thread was?

[jnatale3]

Got the PM.