builing a 99-2001 cobra motor...

[redalertlb]

I am trying to build this from a mark VIII motor. I want to know if it is possible to swap the 99-01 head and intake on that easy and just be done with the imrc's or is it a little more to it. I want to drop it into my 01 mustang gt.

[droptopsnake01]

sell your block and find a teskid block. Then do the build. Anyways yes you can swap and use the 4v heads as long as you use everything else from the "top" of the motor.

[redalertlb]

well the mark VIII has a teksid so thats the starting point...basicly i need upper and lower intake manifold, heads w/internals, and maybe the pistons and rods?

[droptopsnake01]

well the mark VIII has a teksid so thats the starting point...basicly i need upper and lower intake manifold, heads w/internals, and maybe the pistons and rods?

Go w/ some forged internals.

You can find completer 03/04 heads for around $900 if you look. Also a complete intake is easy to find to.

Good luck.

[redalertlb]

so it is possible for me to just change internals, bolt up the heads and intake and i have a 01 cobra?

[redalertlb]

also would the Mark VIII computer work?